Difference between revisions of "3D Printing"

From Ithaca Generator Wiki
Jump to navigation Jump to search
(Linking to 3DBenchy)
 
Line 26: Line 26:
  
 
Where to find STL files for printing:<br />
 
Where to find STL files for printing:<br />
Thingiverse http://www.thingiverse.com
+
Thingiverse http://www.thingiverse.com<br />
 +
My Mini Factory https://www.myminifactory.com<br />
 +
Youmagine https://www.youmagine.com

Latest revision as of 13:16, 13 January 2020

Overview
Ithaca Generator has 3 robust workhorse printers, each with different advantages. There is a Benchy on each printer so you can see differences, and they're taped to the top of their respective printer. Each Benchy took 1.5 hours and is sized accordingly so you can get an idea of each printer's "style".

Prusa MK2S: small 10 x 8 x 8 inch (250 x 210 x 210 mm) build volume, slowest, but very accurate.
Prints PLA and PETG.
Use an SD card to print.
General remarks: This should be your default printer unless you're printing very large (Xinkebot) or want extra speed/precision (RailCore).

Xinkebot: largest 16 x 16 x 20 inch (400 x 400 x 500 mm) build volume. Relatively fast, but that's because it uses a larger nozzle so it's lower rez, and prints will have minor flaws, but if you're going to do post-processing anyway, doesn't matter.
Prints PLA and PETG.
Can print flexibles with special Flexion extruder system (normally the Bondtech extruder is on the printer).
Use an SD card to print.
General remarks: This is your "go to" printer for large prints. It's lower resolution than the others, and the prints won't be as perfectly smooth, but they will be quite good nonetheless.

RailCore: large 12 x 12 x 13 inch (300 x 300 x 330 mm) build volume. Very fast and accurate. Robust workhorse.
Best for PETG and more experimental filaments such as those filled with carbon fiber, but can print PLA just fine too.
Use the web interface to upload and print.
General remarks: Makes beautiful prints quickly. More complex interface and controls than the other printers. While not a strict requirement, it would be better to master the Prusa or Xinkebot before moving on to this printer.

IMPORTANT:
Don't use hairspray any more.
Don't use any sticking aid on the Prusa or the Railcore. They both have special beds that will be very sticky when hot.
Magigoo should be used on the Xinkebot glass bed.

Simplify 3D Slicer Software. Use this to make your G-Code from your STL file.

Where to find STL files for printing:
Thingiverse http://www.thingiverse.com
My Mini Factory https://www.myminifactory.com
Youmagine https://www.youmagine.com